ComInTec TE/IF High Performance WideBelt-Pulley Drives
ComInTec VAR.D.E.A.C. TE/IF series employs high performance
wide variator V-Belts
with Kevlar reinforced nylon fibers. The steel TE/IF
pulleys are often replacing complete pulley drives produced
in Aluminum and are considered a very durable and reliable
economical alternative to consider in applications below 25
The TE/IF series offers an integral control adjustment system with handwheel and speed locking screw that moves the adjustable face of the control pulley axially to effectively change the pitch diameter of the sheave. With the control pulley typically mounted on the electric motor, the tensioning pulley with its helical spring is mounted on the driven shaft. As the control pulleys pitch is adjusted the tensioning pulley automatically compensates for this adjustment by moving its adjustment pulley half axially against the helical spring. In this, perfect drive tension is achieved for smooth and efficient power transmission through the drive belt while a wide ratio range of increase or decrease from motor speed is obtained.
The system is ideally suited for applications where a high reliability is required, simple operation, and the absolute minimal of maintenance is desired. While the mechanical variable speed drive system of the TE/IF pulleys is very simple and strait forward, the product is perfectly executed and there long trouble free life is expected. Maintenance is as easy as a simple belt inspection, and service parts is typically a spare belt. Such systems as the TE/IF can be expected to last many, many years of trouble free performance.
Please call us Toll Free for assistance in your purchase. 866.285.5055 ext 2.
Click Catalog Selection for PDF
|ComInTec TE/ IF Pulleys Documentation|
|Complete Catalog for ComInTec Pulleys >||.|
|TVT CWb Belts for TE/IF >||.|